| Part number | M2 1081 |
| Input voltage | 24 V DC |
| Nominal current | 1 |
| Running speed | 9 |
| IP code | IP55 |
| Switch on duration | 20 |
Product Information / Datasheet (PDF)
Compact solutions in one actuator: The EA-SZ EA-SZ 24/80/550 rack actuator offers several advantages: There are no protruding parts due to the toothed rack in one groove. This allows planning in any length. In addition, the SHE actuator has a long service life with minimal maintenance and high rigidity.
The EA-SZ 24/80/550 actuator works very quietly and can be extended via a connecting shaft with a mechanical idler. Thus, it is also ideal for use with large window elements or rooflight dome systems. If required, the actuator can be extended by means of a rack idler and a connecting shaft (synchronous operation for a more stable opening of large elements).
Advantages at a glance:
| Matchcode | EA-SZ 24/80/550 |
| Article name | Rack-and-pinion actuator EA-SZ 24/80/550 |
| Part number | M2 1081 |
| Input voltage | 24 V DC |
| Nominal current | 1 |
| Stroke | 550 |
| Push force | 800 |
| Pull force | 800 |
| Cut-Off | integrated electronic overload cut-off and sequence signal |
| Running speed | 9 |
| IP code | IP55 |
| Switch on duration | 20 |
| Mounting way | attached |
| Weight | 2.6 |
| Housing | Rack housing: anodized aluminum E6 / EV1, gray, motor housing: plastic, stroke + 220 mm x 54 x 120 mm |
| Housing type | Aluminium |
| Colour | On request |
| Housing length | 220 |
| Housing width | 54 |
| Housing height | 120 |
| Connection cable | Silicone cable 3 x 0.75 mm², light gray, Length 1,500 mm |
| Environment temperature range | -10 °C - 60 °C |
| Brackets included | yes |
| Part no. | Matchcode | |
|---|---|---|
| M2 1083 | EA-SZ-M-350 | |
| M2 1083 A | EA-SZ-VERBIND-1 | |
| M2 1083 B | EA-SZ-VERBIND-2 | |
| M2 1084 | EA-SZ-M-550 | |
| M2 1089 | EA-SZ-M-750 | |
| M2 1091 | EA-SZ-M-1000 |
Electromechanical rack actuator type EA-SZ 24/80/***
Tested to DIN EN 12101-2. Voltage 24 volts DC; Rated current 1.0 A, running speed at rated load approx. 9 mm/s, with eyebolt d = 6 mm; Rack housing: anodized aluminum; Motor housing: plastic; with integrated, current-dependent load disconnection; with potential advance (terminal F); Protection class: IP55; swtch-on duration 20% stepless storage possible (only with solo operation); including upper and lower bracket and 1.5 meter connection cable, max. 6 pcs parallel, Dimensions: Length: stroke + 220 mm Stroke: 350, 550, 750, 1000 mm, lifting force: 800 N, Width: 54 mm Height: 120 mm.
| Brochure EA-SZ_Antriebsbroschuere | Actuator brochure for the gear rack actuator EA-SZ |
| Brochure Window Automation | Brochure Window Automation |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| BA_EA-SZ_DE-EN_11 | Operating manual for rack and pinion actuators EA-SZ-24-80 and EA-SZ-230/65 |
| Produktinformation EA-SZ-24-BA_EA-SZ-24-50-xxx-LO | Product information about the gear rack actuator EA-SZ-24-80 with a nominal power of 800 N |
| Certificate EA-SZ-24-80-xxx | Declaration of conformity for the gear rack actuator EA-SZ-24-80-xxx |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
