The wind and rain detector combination WTS-892 was designed for connection to the SHE and ventilation control panels of Simon PROtec Systems GmbH. In the event of excessive wind and / or rain, the detectors prevent the windows from being controlled by the control panel being left open.
The wind force measured via the wind turbine is passed on to the integrated evaluation electronics. This measures the actual value and matches it with the set limit value. If the value is exceeded, a signal contact activates the "Close" command.
The WRD wind and rain detector is equipped with a heated sensor plate. This prevents false triggering in extreme weather conditions. Thanks to the galvanic gold coating, the sensor plate is resistant to weather and pollution
The limit value of the wind force can be freely selected (between 1 and 12 Beaufort). By default, the detector is at 4 Bft. set. Over a switch-on delay of up to 24 seconds, any wind gusts can be bridged. It is possible to mount the wind and rain detector both on a mast and directly on a wall.
Wind and rain detector combination WRD at a glance:
| Matchcode | WRD |
| Article name | wind rain detector WRD |
| Part number | A3 4581 |
| IP code | IP65 |
| Weight | 0.7 |
| Housing | Plastic ABS |
| Housing type | |
| Colour | light grey |
| Housing length | 190 |
| Housing width | 100 |
| Housing height | 150 |
| Environment temperature range | -20 °C - 85 °C |
Wind / Rain detector, type WRD
Wind / Rain detector with built-in evaluation electronics and built-in time delay, for connection to SHEV and ventilation control systems, with heated sensor surface from galvanic gold to prevent false triggering in case of dew, snow or ice, rated voltage 24 V DC / AC, current consumption in standby mode 70 mA (when triggered 110 mA), protection class IP 65, operating temperature - 20° C to +85° C, load capacity of the signal contact 30 V / 1 A, with potential-free change-over contact for an on-site evaluation, housing ABS, light-grey, incl. mounting bracket in aluminum, as well as a pole clamp, galvanized, for 2" pipe.
Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: Rain detector, type WRD
Article number: A3 4581
WEEE Reg. No.: DE 97535049
 Brochure Control Panels | Brochure Control Panels |
| Brochure wind and rain detector control | Control brochure for wind and rain detectors |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Certificate WRD / RD | Declaration of conformity for the wind and rain detector WRD and RD |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
