The wind and / or rain detector is equipped with integrated evaluation electronics and built-in time delay and designed for connection to the SHE and ventilation control panels of Simon PROtec Systems GmbH. The detectors prevent the windows controlled by the control panel from being exposed to excessive wind and / or rain. The wind force measured via the wind turbine is passed on to the integrated evaluation electronics, which measures the actual value and compares this with the set limit value. If the value is exceeded, a signal contact activates the "Close" command.

Wind and rain detectors for mast and wall mounting

The rain detector is equipped with a heated sensor plate. When rain comes in, a signaling contact is passed on to the connected controller. This activates a "close" command. The transmitter is located in a housing of the detector.The wind force limit can be freely selected between 1 and 12 Beaufort. The detector is factory set to 4 Bft. set. To bridge gusts of wind, a switch-on delay of up to 24 seconds can be set up. The wind / rain detector provides a potential-free contact for on-site evaluation and can be mounted on a mast or directly on a wall.

Wind and / or rain detector at a glance:

• Wind sensor adjustable from a gentle breeze to a hurricane
• Rain sensor with certified gold contacts for reliable reporting
• after activation 15-minute constant CLOSE command to relieve the controller in case of rapid weather fluctuations

Product Information

Brochure Control Panels	Brochure Control Panels
Brochure wind and rain detector control	Control brochure for wind and rain detectors

Certificates

Certificate WRD / RD	Declaration of conformity for the wind and rain detector WRD and RD
Environmental Product Declaration (EPD)	Environmental Product Declaration (EPD)

Other

Safety instructions and warranty conditions

Safety instructions and warranty conditions