| Part number | M2 2005 |
| Input voltage | 24 V DC |
| Nominal current | 3.0 |
| Running speed | 23 |
| IP code | IP54 |
| Switch on duration | 30 |
Product Information / Datasheet (PDF)
Folding arm² actuators- Premium RWA window opener
The folding arm is the premium actuator technology for electromotive window opening on facades and roofs. It is not only designed and tested for use in smoke and heat ventilation, but also for controlled natural ventilation. Actuators of the "folding arm" type have a special kinematics and their high-performance gear (> 20,000 LW) in combination with the stainless steel lever arms is very resistant to variable loads (wind, snow). Especially the symmetrical design and, when closed, the small installation dimensions make this automatic window opener ideal for projects with high aesthetic demands - especially for large and heavy windows. All folding arm actuators are tested and certified according to DIN EN 12101-2 together with various profile series for use as natural smoke and heat exhaust ventilation devices. The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All folding arm² actuators are characterised by a very high efficiency for the low power consumption and thus reduce permanently running operating costs.
Performance features folding arm² actuator PA-KL²-55/1200:
The PA-KL²-55/1200 folding arm² actuator is a single operation actuator with integrated load cut-off and can be used for the automation of inward and outward opening windows on facades and roofs. Installation is possible on main and secondary closing edges. The folding arm² actuator PA-KL²-55/1200 has an opening stroke of 1200 mm and, depending on the installation position, thus achieves a large cross-section for effective natural ventilation/smoke extraction. The folding arm² actuator PA-KL²-55/1200 has a push and pull force of 550 N. Actuator parameters such as force and opening stroke can be adapted to local conditions on site using the SICO LINK software interface. The PA-KL²-55/1200 folding arm² actuator is equipped with a restart lock, a soft start and a soft close to relieve the seals. The PA-KL²-55/1200 folding arm² actuator can also be used together with locking actuators in sequential control systems; its potential-free feedback contact is freely programmable.
Scope of delivery: PA-KL² + SICO-PLUG (without connection cable, please order separately)
| Matchcode | PA-KL²-L-55/1200 |
| Article name | Folding Arm² PA-KL²-L-55/1200 |
| Part number | M2 2005 |
| Input voltage | 24 V DC |
| Nominal current | 3.0 |
| Input voltage range | - 15 % / + 25 % |
| Ripple | 500 |
| Networked standby | 0.9 W (1 min) |
| Stroke | 1200 |
| Push force | 550 |
| Pull force | 550 |
| Nominal locking force | 660 |
| Classification | EN 12101-2, EN 60335-1, EN 60335-2-103 |
| Cut-Off | Integrated overload cut-off with microprocessor |
| Running speed | 23 |
| IP code | IP54 |
| Switch on duration | 30 |
| Mounting way | attached |
| Weight | 7.6 |
| Housing | Aluminum |
| Housing type | Aluminium |
| Colour | Alu EV6/EV1 |
| Housing length | 751 |
| Housing width | 58 |
| Housing height | 165 |
| Appliance class | III |
| Connection cable | SICO PLUG connection. Excluding connection cable / set. |
| Nominal working temperature | 20 |
| Environment temperature range | -5 °C - 75 °C |
Folding arm² PA-KL²-L-55/1200
24 V DC / 3 A / 550 N / 1200 mm stroke
Single operation actuator
Folding arm window actuator for SHEV and controlled natural ventilation applications.
Flexible installation on main and secondary closing edges.
Suitable for frame and sash mounting on inward and outward opening sashes/flaps in roofs and facades.
With integrated, programmable SICO switch-off technology with microprocessor and SICO-PLUG connection plug.
Technical data:
Rated voltage: 24 V DC (- 15 % / + 25 %)
Ripple: max. 500 mV
Rated current: 3 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 550 N
Pulling force: 550 N
Nominal locking force: 660 N
Stroke length: 1200 mm
Running speed: 23 mm/s
Protection class: IP54 (IP65 on request)
Temperature range: -5°C to +75°C
Housing: Aluminium profile housing EV1 anodised
Lever: two-arm, stainless steel
Connection: SICO-PLUG (without connection cable / set)
Cut-off: Integrated overload cut-off with microprocessor
Volt-free contact (freely adjustable)
Dimensions (LxWxH): 751 x 58 x 165 mm
Weight: 7.6 kg
Options:
- Connecting cable/set
- Mounting brackets (selection depending on profile type and mounting position)
- Coating according to RAL or DB
- Synchro capable actuator
Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: Folding arm² PA-KL²-L-55/1200
Article number: M2 2005
WEEE Reg. No.: DE 97535049
| Short brochure PA- Folding Arm² | Short brochure for the Folding Arm² PA-KL², PA-KL²-T door opener and PA-KL²-DF rotary wing actuator, incl. SICO |
| Technical detail PA-KL²-x-xx opening widths | Supplement to the operating manual PA-KL²-x-xx: permissible mounting positions and associated opening widths |
| Operating manual_PA-KL²-x-xx_EN | Operating manual for folding arm actuator PA-KL²-x-xx in English |
| TD_M2-1485_EA-KL2-L | Technical details for installation of folding arm EA-KL2-L for roof exit |
| Technical Details EA-KL2-L_Li-Re | Technical details for installation of folding arm long version on Wicona profiles for roof exit EA-KL2-L-Li-Re |
| Technical Details EA-KL2-L_LI-RE | Technical details for installation of folding arm long version on Raico profiles for roof exit EA-KL2-L-Li-Re |
| Technical details EA-KL2-L_LI-RE | Technical details for installation of folding arm actuator EA-KL2-L-LI-RE on SCHÜCO profiles right and left (roof exit) |
| Technical Details_K-KL2-M(S)-AW57RO-K2_1613_DE_11 | Mounting example for folding arm K-KL2-M(S)-AW57RO-K2_1613 |
| Technical Details_K-KL2-M-S-RAICO105D-K2-1616 | Example for installation for window profile RAICO105D for bracket K2-1616 |
| Technical Details_K-KL2-S(M)-ESCO-K2-1615_EN_11 | Example for installation on window profile for bracket K2 1615 |
| Technical Details_K2-1612_K-KL2-S_12 | Example for installation of the bracket K2 1612 on the secondary closing edge, SHE window opening outwards |
| Technical Details_K2-1628_K-KL2-M3D_10 | Example for installation of the bracket K2 1628 on a Wicona SHE window profile for mounting on a sloping closing edge, axial, opening outwards |
 CAD drawing PA-KL²-xx | CAD drawing for folding arm² PA-KL²-xx |
| CAD drawing PA-KL²-xx | CAD drawing for folding arm² PA-KL²-xx |
| Certificate actuators | CE Declaration of conformity for Folding arm², chain, linear and slit actuators |
| Certificate EN 60335 | EN 60335-1:2012/A11:2014 EN 60335-2-103:2015 |
| Certificate PA-KL2 | Declaration of conformity for folding arm PA-KL²-K-50 / PA-KL²-K-80 /PA-KL²-50 / PA-KL²-80 / PA-KL²-100 / PA-KL²-M-75 / PA-KL²-L-55 |
| Certificate UKCA_PA-KL²_PA-KL²-T_PA-KL²-DF | Declaration of conformity for folding arm actuator PA-KL², PA-KL²-T, PA-KL²-DF |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
 Calculation Tool Folding Arm² | Excel Tool for roof windows |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
