| Part number | ST4 3437 |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 12 |
| SHE Groups | 1 |
| Ventilation groups | 1 |
Product Information / Datasheet (PDF)
The M-SHEV-12-AP-ECO is a SHEV control panel with a modular design. It is housed in a steel case housing and contains the power supply, the entire control and regulating electronics as well as the emergency power supply. Safety-related inputs via sensors such as manual release buttons, smoke detectors or fire alarm systems are controlled by the controller, which then executes the necessary commands. The communication of the control modules takes place via BUS technology.
Its modular design and flat design make the M-SHEV easy to install. It consists of a total of four (optionally five) components: ZI-100 central interface, power supply (switching power supply, charging card and battery), MR-120 motor relay, SI-100 sensor interface and the optional MI-100 signaling interface. The switching power supply converts the 230-volt mains supply into a stable and clean 24-volt supply. The central interface serves as a control center, which controls the allocation of SHE groups and ventilation. The connection of the peripheral devices such as manual control devices, smoke detectors or fire alarm systems takes place at the sensor interface. For each SHE group you need a sensor interface. Any number of motor relays that supply the connected actuators can be connected to this sensor interface. All necessary information is queried via the message interface MI.
The M-SHEV 12 AP ECO offers the full functionality of the M-SHEV. It controls ventilation signals from fan buttons, wind and rain detectors, house-trigger buttons, smoke and thermal alarms, the FAS and three monitored detection zones. Only in the area of SIMON LINK there is a small change. Although SIMON LINK can be connected to read out status messages. Changes are not possible, i.e. the system is delivered frozen. This allows us to offer the controller at a much lower price.
The advantages at a glance:
| Matchcode | M-SHEV-12-AP-ECO |
| Article name | Modular control panel M-SHEV-12-AP-ECO |
| Part number | ST4 3437 |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 12 |
| Classification | CE certified EN 12101-10, tested ISO 21927-9 |
| LED signs | LED display operating status network: Permanent display green - mains available LED display operating status lead acid battery ("O.K."): Continuous green - battery is present and charging (charge is being maintained) |
| IP code | IP20 |
| SHE Groups | 1 |
| Ventilation groups | 1 |
| Weight | 14.3 |
| Housing | Sheet steel case |
| Housing type | |
| Colour | RAL 9010 |
| Housing width | 400 |
| Housing height | 516 |
| Housing depth | 155 |
| Appliance class | I |
| Environment temperature range | -5°C - +40°C |
Modular control panel M-SHEV-12-AP-ECO
230 V AC / 24 V DC / 12 A
The M-SHEV-12-AP modular control panel is an electrical control device in a sheet steel housing with power supply, emergency power supply and all control and regulation electronics for operating 24 V DC actuators for building openings, e.g. windows and smoke exhaust flaps. The M-SHEV modular control panel controls actuators both in case of fire and for daily ventilation. In the event of a power failure, the emergency power supply ensures the function of the SHEV system for at least 72 hours. The M-SHEV modular control panel provides all necessary connections for release devices (push buttons, smoke detector, fire alarm system). In addition, various components can be connected for daily ventilation applications, e.g. wind/rain detectors and vent buttons. The ventilation function is at the same time a daily function check of the SHEV system. The M-SHEV modular control panel is CE certified according to EN 12101-10.
Technical data:
Input voltage: 230 V AC
Output voltage: 24 V DC
Output current: 12 A
Monitoring: continuous and short-term operation
Protection class: IP20
Temperature range: -5°C - +40°C
Housing: Sheet steel case
Color: RAL 9010
Dimensions (WxHxD): 400 x 516 x 155 mm
Weight: 14.3 kg
Manufacturer:
SIMON PROtec Systems GmbH
Typ: Modular control panel M-SHEV-12-AP-ECO
Article number: ST4 3437
| Brochure Control Panels | Brochure Control Panels |
| Brochure M-SHEV control units | Brochure for the modular control panel M-SHEV |
| Brochure M-SHEV-12-AP | Brochure M-SHEV-12-AP (part of the control unit brochure) |
| Brochure M-SHEV_EN | Brochure for the modular control panel M-SHEV (English) |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Operating manual M-SHEV | Operating manual for the M-SHEV product family |
| CE-Certificate M-SHEV | Declaration of conformity for the modular control panels M-SHEV-10, M-SHEV-10-AP, M-SHEV-12, M-SHEV-12-AP, M-SHEV-12-AP-ECO, M-SHEV-24-AP-ECO, M-SHEV-24, M-SHEV-48, M-SHEV-XX (cascadable power supply EV-24 / 48 A) |
| Certifictate UKCA_M-SHEV | Declaration of conformity for smoke control panel M-SHEV |
| Declaration of performance for the power supply of the M-SHEV | Declaration of performance for the power supply of the M-SHEV (EV-12 / EV-24 / EV-48) |
| Declaration of performance for the power supply of the M-SHEV (UKCA) | UKCA declaration of performance for the power supply of the M-SHEV (EV-12 / EV-24 / EV-48) |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
